SCIPPO
生活產品 Life Style
林品佑 / 張凱婷 / 鍾鎰鴻
指導教授 : 林銘松
摘要 Introduction
SCIPPO 是外派族群的好幫手。針對商務族群在生活中限制範圍限制下進行居家電器的整合，這是一台伸縮方便、體積輕便的智能衣櫥，具有除濕清淨功能，還可將除溼完的水轉換成蒸氣,輕鬆掛燙衣物。
SCIPPO is a great helper for expats. Aiming at integrating home appliances for business people, this is a smart wardrobe that is easy to carry, and light in size. It has the function of dehumidification and cleaning, and can also convert the dehumidified water into steam to iron clothes.
調查研究 Background Research
從潮濕地區對除潮家電的需求中,發現除濕後的水往往被倒掉,若是和其他用水有關的產品整合是否能在不增加使用複雜度下,創造一個更便利的水循環家電。經過幾次討論與修正方向,決定從單身和小家庭的角度切入,在小空間內找到具故事性的產品定位。
It was found that the dehumidified water was often dumped. If integrated with other water-related products, a better water cycle appliance can be created without increasing the complexity of user experience. Our team therefore spotted meaningful product positioning in a limited space for singles or small families.
.png)
設計理念 Design Concept
SCIPPO 具三效合一 : 室內除溼、空氣清淨、蒸燙衣物。能自動偵測水位，滿水即停止。既能向內烘乾衣物，亦能向外降低濕度。衣櫥布簾紋理從耳機絨布得到靈感，兩種軟硬材質融合的產品視覺體驗。
SCIPPO has three main functions: indoor dehumidification, air purification, and steaming clothes. It can automatically detect the water level and stop when it is full. It can not only dry clothes inwards, but also reduce humidity outwards. The texture combines the fusion of both soft and hard materials
產品介紹 Product Description
早上可用蒸燙功能輕鬆燙衣，開啟除溼，回家時把大衣放進衣櫥消毒，同時室內達到理想濕度。室內除溼: 以中等輕度的除溼力幫助降低室內溼度，達到理想乾爽的舒適度。衣物除潮: 除濕乾燥風去除衣物蒸燙後的潮濕水分，溫和烘乾。紫外光: 殺菌除臭，適合幫助消毒外出衣物。蒸燙: 預設十五分鐘的懶人蒸燙，將衣服的皺褶燙平。
The user can use the steaming function then turn on the dehumidification before leaving the house. When the user gets back home he can put his coat in the closet to disinfect and meanwhile the room reaches the ideal humidity.Indoor dehumidification: Reduces indoor humidity to achieve ideal dry comfort.Garment dehumidification: Removes the moisture after steaming clothes gently.UV: Sterilizes and deodorizes clothing.Steam: Preset 15 minutes to smooth out the wrinkles of clothing.
使用流程 Operation Procedure
產品材質為塑料殼面、電子元件機構，與薄透絨布簾。模型以 FDM 的3D 列印機產出機身與分件，經過反覆低到高指數的水砂紙細磨，以灰色汽車補土填起隙縫，再以噴漆補土與水砂紙讓表面呈現拋光效果，最後上色淺灰噴漆。加裝材質相應的布簾以及按鈕色光圖紙。
The materials of the product are plastic, electronic component mechanism, and thin curtain. We used the FDM 3D printing machine to produce the body parts, and then went through repeated low-to-high-index water sandpaper to finely grind, filled the gaps with putty and gave the surface a polished effect.
.png)
.png)
Meet The Team
指導教授
林銘松 Ming-Sung Lin